BS6088 Standards Glass Microshpere/Road Marking Glass Beads for Road Safety
During the production of highway painting, put glass bead into paint based on the ratio of 18-25% (weight percentage), so that the highway paint can still keep reflectivity during wear and friction. The ratio is refer to the specification of Communication Industry Standard of the People's Republ......
Send Inquiry
Product Description
During the production of highway painting, put glass bead into paint based on the ratio of 18-25% (weight percentage), so that the highway paint can still keep reflectivity during wear and friction. The ratio is refer to the specification of Communication Industry Standard of the People's Republic of China No. JT/T280-2004, the standards which is different in different countries and areas.
According to the specification of Communication Industry Standard of the People's Republic of China No.GB/T24722-2009, the granulometry is shown in the table below.
Ratio:2.4-2.6g/cm3
Reflectivity:≥1.50
Roundness:≥80%
Contained ratio of magnetic particlea:≤0.1%
The appearance of glass bead should be colorless, loosen and spherical particle, should be clean without impurity, and without agglomeration
